0531-83510047
13964193999

大家都在搜: 食品级输送带 新葡萄京娱乐场网址 切菜机输送带

当前位置: 新葡萄京 - 资讯中心 > 行业百科 > 行业百科

pu同步带出现异常的现象以及解决方法!

来源: 时间:2020-01-18 11:35:39 浏览次数:
  PU同步带是机械传动的重要组成部分,所以PU同步带的质量决定了传动机械的寿命。摘要异型同步带是常见的头痛问题,而同步带断裂是影响安全生产的重要因素。下面小编就来先容一下PU同步带在生产中出现的一些异常现象及解决方法。
  Pu synchronous belt is an important part of mechanical transmission, so the quality of Pu synchronous belt determines the life of transmission machinery. The abnormal synchronous belt is a common headache, and the rupture of the synchronous belt is an important factor affecting the safety of production. Next, I will introduce some abnormal phenomena and solutions of Pu synchronous belt in production.
  1. 同步带箕斗齿。这主要是由于PU同步带与同步齿轮齿型不匹配,安装后即可发现。解决方案:检查是同步带的原因还是同步轮的原因,更换有问题的零件。建议购买带同步轮的同步带。安森同步带企业,配套生产同步轮,可配套订货,更安全更省心。
  1. Synchronous belt skip teeth. This is mainly due to the mismatch between Pu synchronous belt and synchronous gear tooth profile, which can be found after installation. Solution: check whether it is the cause of synchronous belt or synchronous wheel, and replace the defective parts. It is recommended to purchase synchronous belt with synchronous wheel. Anson synchronous belt Co., Ltd. can produce synchronous wheel, which can be ordered, safer and more worry free.
  2.PU同步带不同步运行。关于这个问题,有两点原因。首先,检查下一个张紧轮的张力是否一致;另一方面,取下同步带,检查两个同步带的齿型对中。
  2. Pu synchronous belt is not running synchronously. There are two reasons for this. First, check whether the tension of the next tensioning wheel is the same; on the other hand, remove the synchronous belt and check the tooth alignment of the two synchronous belts.
新葡萄京娱乐场网址
  3.PU同步带接口位置断开。一方面,瞬时张力太大,另一方面,机械张力太大,超过了负载连接的同步带,建议更换无缝同步带,无缝同步带环无界面,操作更加稳定,负载比较大。连接同步带
  3. Pu synchronous belt interface position is disconnected. On the one hand, the instantaneous tension is too large, on the other hand, the mechanical tension is too large, which exceeds the load connected synchronous belt. It is recommended to replace the seamless synchronous belt. The seamless synchronous belt ring has no interface, and the operation is more stable, and the load is relatively large. Connecting the timing belt
  4. 同步带变形。PU同步带内置钢丝张力强。如仍有拉丝变形,机器调试不稳定或同步带类型不合适。各齿型同步带均有标准轴承范围,具体可咨询客户!
  4. The synchronous belt is deformed. Pu synchronous belt has strong internal steel wire tension. If there is still drawing deformation, the machine debugging is not stable or the type of synchronous belt is not suitable. Each tooth type synchronous belt has the standard bearing range, may consult the customer specifically!
  本文由新葡萄京娱乐场网址厂家整理发布,更多相关信息可以点击咨询:
  This article is organized and released by the manufacturer of high angle conveyor belt. For more information, please click

产品中心 PRODUCT CENTER

联系大家CONTACT US

手机:13964193999(孙经理)
座机:0531-83510047
QQ(客服):136559297
地址:山东省济南市章丘区刁镇民营经济开发区

XML 地图 | Sitemap 地图